Verifying the configuration – H3C Technologies H3C WX3000E Series Wireless Switches User Manual
Page 216
195
Figure 165 Configuring a default route
Verifying the configuration
1.
Display the route table:
Enter the IPv6 route page of Switch A, Switch B, and AC, respectively, to verify that the newly
configured static routes are displayed as active routes on the page.
2.
Ping Host B from Switch A:
<SwitchA> system-view
[SwitchA] ping ipv6 3::2
PING 3::2 : 56 data bytes, press CTRL_C to break
Reply from 3::2
bytes=56 Sequence=1 hop limit=254 time = 63 ms
Reply from 3::2
bytes=56 Sequence=2 hop limit=254 time = 62 ms
Reply from 3::2
bytes=56 Sequence=3 hop limit=254 time = 62 ms
Reply from 3::2
bytes=56 Sequence=4 hop limit=254 time = 63 ms
Reply from 3::2
bytes=56 Sequence=5 hop limit=254 time = 63 ms
--- 3::2 ping statistics ---
5 packet(s) transmitted
5 packet(s) received