Verifying the configuration, Remote 802.1x authentication configuration example, Network requirements – H3C Technologies H3C WX3000E Series Wireless Switches User Manual
Page 417
396
Figure 398 Adding an account
Verifying the configuration
•
During the authentication, the user does not need to enter the username or password. After passing
MAC authentication, the client can associate with the AP and access the WLAN.
•
You can view the online clients on the page you enter by selecting Summary > Client.
Remote 802.1X authentication configuration
example
Network requirements
Perform remote 802.1X authentication on the client.
•
Use IMC as a RADIUS server for AAA. On the RADIUS server, configure the client's username as
user, password as dot1x, and shared key as expert. The IP address of the RADIUS server is
10.18.1.88.
•
On the AC, configure the shared key as expert, and configure the AC to remove the domain name
of a username before sending it to the RADIUS server. The IP address of the AC is 10.18.1.1.
Figure 399 Network diagram