Verifying the configuration, Wpa-psk authentication configuration example, Network requirements – H3C Technologies H3C WX3000E Series Wireless Switches User Manual
Page 399: Configuring the ac
378
Figure 362 Enabling 802.11n(2.4GHz) radio
Verifying the configuration
•
The client can successfully associate with the AP and access the WLAN network.
•
You can view the online clients on the page that you enter by selecting Summary > Client from the
navigation tree.
Figure 363 Viewing the online clients
WPA-PSK authentication configuration example
Network requirements
As shown in
, connect the client to the wireless network through WPA-PSK authentication. The
client and the AC have the same PSK 12345678.
Figure 364 Network diagram
Configuring the AC
1.
Create an AP:
a.
Select AP > AP Setup from the navigation tree.
b.
Click Add.
c.
On the page that appears, set the AP name to ap, select the AP model WA3628i-AGN, select
Manual from the Serial ID list, enter the AP serial ID, and click Apply.