Acl and qos configuration example, Network requirements – H3C Technologies H3C WX3000E Series Wireless Switches User Manual
Page 699
678
Table 225 Configuration items
Item Remarks
WLAN ID
Display the selected WLAN ID.
WLAN Service
Display the specified WLAN service to which you want to apply a QoS policy.
Inbound Policy
Apply the QoS policy to the packets received by the wireless service.
Outbound Policy
Apply the QoS policy to the packets sent by the wireless service.
Trust Mode
Set the priority trust mode:
•
Untrust—Trusts the port priority.
•
Dscp—Uses the DSCP values of received packets for mapping.
•
802.11e—Uses the 802.11e priority of received 802.11 packets for mapping.
QoS Priority
Set the local precedence value.
ACL and QoS configuration example
Network requirements
As shown in
, in the WLAN, the FTP server (10.1.1.1/24) is connected to the AC (SSID:
service1), and the wireless clients are connected to the AC through APs and a Layer 2 switch and access
the network resources.
Configure an ACL and a QoS policy on the AC to prohibit the wireless clients from accessing the FTP
server from 8:00 to 18:00 every day:
1.
Add an ACL to prohibit the hosts from accessing the FTP server from 8:00 to 18:00 every day.
2.
Configure a QoS policy to drop the packets matching the ACL.
3.
Apply the QoS policy in the inbound direction of the wireless service named service1.
Figure 705 Network diagram
FTP server
10.1.1.1/24
AC
L2 Switch
AP 1
AP 2
SSID: service1
service1
service1