H3C Technologies H3C WX3000E Series Wireless Switches - Manual (Page 409)

388
• Use the intelligent management center (IMC) as the RADIUS server for authentication, authorization,
and accounting (AAA). On the RADIUS server, configure the client's username and password as
the MAC address of the client and the shared key as expert. The IP address of the RADIUS server
is 10.18.1.88.
• The IP address of the AC is 10.18.1.1. On the AC, configure the shared key for communication with
the RADIUS server as expert, and configure the AC to remove the domain name of a username
before sending it to the RADIUS server.
Figure 382 Network diagram
Configuring the AC
1. Assign an IP address to the AC:
a. Select Network > VLAN to create a VLAN on the AC.
b. Select Device > Interface Management to assign an IP address to the VLAN interface.
2. Configure a RADIUS scheme:
a. Select Authentication > RADIUS from the navigation tree.
b. Click Add.
c. On the page that appears, add two servers in the RADIUS Server Configuration area as shown
in
Figure 104 , and specify the key expert.
d. Enter mac-auth in the Scheme Name field.
e. Select Extended as the server type.
f. Select Without domain name from the Username Format List.
g. Click Apply.