H3C Technologies H3C WX3000E Series Wireless Switches - Manual (Page 649)

628
Figure 668 AP configuration
e. Select Security > Rogue Detection from the navigation tree.
f. On the AP Monitor tab, click the icon for the target AP.
g. Select the operating mode Monitor.
h. Click Apply.
Figure 669 AP operating mode configuration
3. Enable the 802.11n(2.4GHz) radio mode:
a. Select Radio > Radio from the navigation tree.
b. Select the AP with the radio mode 802.11n(2.4GHz).
c. Click Enable.
Figure 670 Radio configuration
4. Configure rogue detection rules:
a. Select Security > Rogue Detection from the navigation tree.
b. Click the Rule List tab and click Add.