Inter-ac roaming configuration example, Network requirements, Inter-ac roaming, see – H3C Technologies H3C WX3000E Series Wireless Switches User Manual
Page 488
Advertising
467
Intra-AC roam association appears in the Roam Status field.
Figure 507 Verifying intra-AC roaming
Inter-AC roaming configuration example
Network requirements
As shown in
, two ACs that each are connected to an AP are connected through a Layer 2
switch. Both ACs are in the same network. The IP address of AC 1 is 192.168.1.100 and that of AC 2 is
192.168.1.101 A client associates with AP 1.
Configure inter-AC roaming so that the client can associate with AP 2 when roaming to it.
Advertising
This manual is related to the following products: