H3C Technologies H3C WX3000E Series Wireless Switches - Manual (Page 230)

209
Configuring and displaying clients' IP-to-MAC bindings
1. From the navigation tree, select Network > DHCP.
2. Click the DHCP Relay tab to enter the page, as shown in Figure 173 .
3. In the User Information field, click User Information to view static and dynamic bindings.
Figure 177 Displaying clients' IP-to-MAC bindings
4. Click Add to enter the page, as shown in Figure 178 .
Figure 178 Creating a static IP-to-MAC binding
5. Configure static IP-to-MAC binding, as described in Table 81 .
6. Click Apply.
Table 81 Configuration items
Item Description
IP Address Enter the IP address of a DHCP client.
MAC Address Enter the MAC address of the DHCP client.
Interface Name
Select the Layer 3 interface connected with the DHCP client.
IMPORTANT:
The interface of a static binding entry must be configured as a DHCP relay agent.
Otherwise, address entry conflicts might occur.