Configuration guidelines, Configuration procedure – H3C Technologies H3C WX3000E Series Wireless Switches User Manual
Page 799
Advertising
778
Figure 811 Network diagram
Configuration guidelines
An AP starts session-mode load balancing only when both the maximum sessions and maximum session
gap are reached.
Configuration procedure
1.
Before you configure load balancing, configure AP 1 and AP 2 on the AC to establish a
connection between the AC and each AP.
For the related configuration, see "
."
2.
Configure session-mode load balancing:
a.
Select Advanced > Load Balance from the navigation tree.
b.
On the Load Balance tab, select the Session mode, enter the threshold 5, and use the default
value for the gap.
c.
Use the default values for Max Denial Count and RSSI Threshold.
d.
Click Apply.
AC
L2 Switch
AP 1
AP 2
Client 1
Client 7
Client 4
Client 6
Client 5
Client 3
Client 2
Advertising
This manual is related to the following products: