H3C Technologies H3C WX3000E Series Wireless Switches - Manual (Page 667)

646
Step Remarks
1. Adding a time range
Optional.
A rule referencing a time range takes effect only during the
specified time range.
2. Add an IPv6 advanced ACL
Required.
For more information, see "
Adding an IPv6 ACL ."
3. Configuring a rule for an IPv6 advanced ACL Required.
Adding a time range
You can implement ACL rules based on the time of day by applying a time range to them. A time-based
ACL rule only takes effect in any time periods specified by the time range.
To add a time range:
1. Select QoS > Time Range from the navigation tree.
2. Click the Add tab to enter the time range adding page.
Figure 683 Adding a time range
3. Configure the time range information, as described in Table 208 .
4. Click Apply.
Table 208 Configuration items
Item Description
Time Range Name Set the name for the time range.