H3C Technologies H3C WX3000E Series Wireless Switches - Manual (Page 685)

664
Item Description
Trust Mode
Select the priority trust mode:
• Dot1p—Uses the 802.1p priority of received packets for mapping.
• Dscp—Uses the DSCP value of received packets for mapping.
• Dot11e—Uses the 802.11e priority of received packets for mapping. This
option is applicable to only WLAN-ESS interfaces.
IMPORTANT:
Support for priority trust modes depends on the interface type. The supported
priority trust modes are shown in the Trust Mode list.
(Select the ports)
Specify the ports to be configured.
Click the ports to be configured in the port list. You can select one or more
ports.
Configuring the port priority
1. Select QoS > Port Priority from the navigation tree.
Figure 694 Port priority
2. Click the icon for a port to enter the page for configuring the priority and priority trust mode of
the port.
Figure 695 Modifying the port priority
3. Set the port priority, as described in Table 219 .
4. Click Apply.
Table 219 Configuration items
Item Remarks
Interface Name Name of the interface to be configured.