Yaskawa i80M Connecting Manual - Manual (Page 183)

21. 2.2 INPUT SIGNALS (PC NC)
(1) First Program Operation Mode Control (1/4)
NOTE: Signals marked * are common to all programs. They are provided in the first program
operation mode control sequence only. As regards the other signals, equivalent types are
provided for the first, second, and third programs, respectively.
6 5 4 3 2 1 0
#3000 EDT MEM MD I TP STP H JOG RT
#3001
#3003
#3004
#3005
#3006
#3007
#3008
#3009
OPERATION MODE
PROGRAM SELECT (UNUSED) CRT DISPLAY
PROGRAM SELECT
I
MP4 MP2 MP1 JV16 JV8 JV4 JV2
MANUAL PULSE JOG SPEED SELECT
MAGNIFICATION SELECT
ROV 4 ROV 2 ROV 1 ST
I
RAPID TRAVERSE OVERRIDE START/STOP
STLK ERS
THREADING ERROR START EXTERNAL
DETECT ON INTERLOCK RESET
I ERR2 ERR1 I ERRO
SERVO OFF DECEL & BLOCK
STOP STOPPAGE
MRD
MACHINE
READl ED
SVON I
TIME COUNT EXTERNAL
POWER ON
EXTERNAL ERROR DETECTiON
AUXILIARY
AFL MLK PRST ABS SBK
FUNCTION MACHINE DRY RUN PROGRAM MANUAL SINGLE
LOCK LOCK RESTART ABSOLUTE BLOCK
.-–J-—--
I EDT LK ZRN2
I
SETUP POINT EDIT LOCK SECOND
RETURN
REFERENCE
REFERENCE RETURN
RETURN
I CTASK , PST CPRN BTASK HOFS
C TASK B TASK CURRENT STORAGE AUTOMATIC
START START VALUE MACHINING
INTERRUPT
MODE
POINT RETURN