A8. installation and wiring – Yaskawa i80M Connecting Manual User Manual
Page 320
A8. INSTALLATION AND WIRING
A8. RECEIVING
This motor has been put through severe tests at the factory before shipped. After unpacking,
however, check and see the following.
Its nameplate ratings meet your requirements.
It has sustained no damage while in transit.
The output shaft should be hand-rotated freely.
However, the brake-mounted motor does not
rotate as it is shipped with the shaft locked.
●
Fastening bolts and screws are not loose.
If any part of the motor is damaged or lost, immediately notify us giving full details and name-
plate data.
A8. 2 INSTALLATION
A8. 2.1 AC Servomotor
AC Servomotor can be installed either horizontally or vertically.
(1) Before Mounting
Wash out anticorrosive paint on shaft extension and flange surface with thinner before connect-
ing the motor to the driven machine. See Fig. A8. 1.
ANTICORROSIVE
PAINT
Fig. A8. 1 Anticorrosive Paint to be Removed
320