Yaskawa i80M Connecting Manual - Manual (Page 38)

EXTERNAL FEEDBACK UNIT CONNECTION
When the - and - are used in conjunction with the
it is easy to operate an external feedback unit (e. g., linear scale).
11,4.1 NAMES AND TYPES OF THE SUPPLIES FROM YASKAWA ELECTRIC CORP.
(1) Linear Scale Interface Circuit Board
Type Parts code Remarks
-3 DTN6660 3-axis specifications
(2) Patch Bay Unit
Type Parts code Remarks
DUN20730 3-axis specifications
(3) Interface Cable
Type Parts code Remarks
11.4.2 CONNECTION DIAGRAM
See Fig. 11.12 on page 43.
11.4.3 FUNCTIONS
(1) Linear Scale Interface Circuit Board
This circuit board serves as the interface between AXIS 1 ) and external
feedback unit (e. g., linear scale).
NOTE: As the LIF receives the feedback signals from up to three axes via its only connector
it needs the patch bay unit ).
(2) Patch Bay Unit
This unit receives the feedback signals from up to three axes, and delivers them to the LIF
- * ) via one connector.
Further, this unit supplies power to the connected external feedback unit. The patch bay unit
is to be mounted in the NC panel only.
Rated voltage: 5 V (4.5 to 5.5 V)
3 8