Loading paper in the multi purpose tray, Loading paper in the multi purpose tray -26, Open the multi purpose tray – TA Triumph-Adler 6555i User Manual

Page 130

Advertising
background image

3-26

Preparation before Use > Loading Paper

Loading Paper in the Multi Purpose Tray

The multi purpose tray will hold up to 150 sheets of A4 or smaller plain paper (80 g/m

2

) (or up to 165 sheets of 64 g/m

2

plain paper) or up to 50 sheets of plain paper (80 g/m

2

) (or up to 55 sheets of 64 g/m

2

plain paper) lager than A4.

The multi purpose tray accepts paper sizes from A3 to A6-R and Hagaki and from Ledger to Statement-R, 12 x 18", 8K,
16K and 16K-R. Be sure to use the multi purpose tray when you print on any special paper.

The capacity of the multi purpose tray is as follows.

• A4 or smaller plain paper (80 g/m

2

), recycled paper or color paper: 150 sheets (64 g/m

2

plain paper : 165 sheets)

• B4 or larger plain paper (80 g/m

2

), recycled paper or color paper: 50 sheets (64 g/m

2

plain paper : 55 sheets)

• Hagaki: 30 sheets

• OHP film: 10 sheets

• Envelope DL, Envelope C4, Envelope C5, Envelope #10 (Commercial #10), Envelope #9 (Commercial #9),

Envelope #6 (Commercial #6), Monarch, Youkei 4, Youkei 2: 10 sheets

• Banner paper: 470.1 mm (18.51") to a maximum of 1220.0 mm (48"): 1 sheet (manual feed), 10 sheets (when

optional banner tray is attached)

1

Open the multi purpose tray.

When loading paper sizes 12 x 18" and from A3 to B4 and Ledger to Legal, extend the support
tray section of the multi purpose tray until the "∆" mark is fully appeared.

IMPORTANT

When using media types other than plain paper (such as recycled or colored paper), always specify the media
type and paper weight settings.

Specifying Paper Size and Media Type for the Multi Purpose Tray (MP Tray Setting) (page 3-33)
Media Type Setting (page 8-13)

If you are using a paper weight of 106 g/m

2

or more, set the media type to Thick and set the weight of the

paper you are using.

NOTE

When you load custom size paper, enter the paper size by referring to

Specifying Paper Size and Media Type for the

Multi Purpose Tray (MP Tray Setting) on page 3-33

.

When you use special paper such as transparencies or thick paper, select the media type by referring to

Specifying

Paper Size and Media Type for the Multi Purpose Tray (MP Tray Setting) on page 3-33

.

Advertising
This manual is related to the following products: