Accessing embedded web server rx, Accessing embedded web server rx -36 – TA Triumph-Adler 6555i User Manual
Page 92
2-36
Installing and Setting up the Machine > Embedded Web Server RX
Accessing Embedded Web Server RX
1
Display the screen.
1
Launch your Web browser.
2
In the address or location bar, enter the machine's IP address or the host name.
Examples: https://192.168.48.21/ (for IP address)
https://MFP001 (if the host name is "MFP001")
The web page displays basic information about the machine and Embedded Web Server RX
as well as their current status.
2
Configure the function.
Select a category from the navigation bar on the left of the screen. When you log in to the
machine as an administrator, you will see [
Device Settings
], [
Function Settings
],
[
Network Settings
], [
Security Settings
], and [
Management Settings
].
NOTE
When connecting to Embedded Web Server RX, a message may appear that reads "There
is a problem with the security certificate of this website". To prevent this message
appearing, install the device certificates of the machine to the Web browser. For details,
refer to Embedded Web Server RX User Guide.