TA Triumph-Adler 6555i - Manual (Page 348)

8-14
Setup and Registration (System Menu) > System Menu
For Custom 1-8, settings for duplex printing and media type name can be changed.
Measurement
Error Handling
Item Description
Duplex Print Prohibit Duplex printing not allowed.
Permit Duplex printing allowed.
Name Change names for Custom 1-8. Names should be not more than 16 characters. Selecting
media type at multi purpose tray, the name after change will be displayed.
Character Entry Method (page 11-9)
Common Settings
Item Description
Measurement Select inch or metric for the unit for paper dimensions.
Value : mm, inch
Common Settings
Item Description
Duplexing Error Set what to do when duplex printing is not possible for the selected paper sizes and media
types.
Value
1-sided: Printed in 1-sided
Display Error: Message to cancel printing is displayed.
Finishing Error Set alternative actions when finishing (Staple/Punch/Offset/Fold/Auto Image Rotation) is not
available for the selected paper size or media type.
Value
Ignore: The setting is ignored and the job is printed.
Display Error: Message to cancel printing is displayed.
No Staple Error Set what to do when staples run out during printing.
Value
Ignore: Printing continues without stapling.
Display Error: Message to cancel printing is displayed.
NOTE
Requires the optional 4,000-Sheet Finisher.
Finished Pages Exceeded Set what to do when finishing (stapling or offsetting) capacity is exceeded during printing.
Value
Ignore: Printing continues without finishing.
Display Error: Message to cancel printing is displayed.
NOTE
Requires the optional 4,000-Sheet Finisher.