TA Triumph-Adler 6555i - Manual (Page 389)

8-55
Setup and Registration (System Menu) > System Menu
Panel Reset Timer If you select [On] for Auto Panel Reset, set the amount of time to wait before Auto Panel Reset.
Value : 5 to 495 seconds (in 5 second increments)
NOTE
This function is displayed when [Device Log History] is set to [On].
Sleep Timer Set amount of time before entering Sleep.
Value :
For Europe
1 to 120 minutes (1 minute increments)
Except for Europe
1 to 240 minutes (1 minute increments)
Interrupt Clear Timer Set the period after which the machine reverts to Normal mode when it has been set to
Interrupt Copy mode and then left unused.
Value : 5 to 495 seconds (in 5 second increments)
Error Job Skip Set whether a job for which a "Add paper in cassette #" or "Add paper in Multi Purpose tray" error
occurred when the job was started is automatically skipped after a set period of time elapses.
Value : Off, On
NOTE
• When a job is skipped, it is moved to the end of the job queue.
• If [On] is selected, set the time until the job is skipped. The setting range is 5 to 90
(5 second increments).
Error Clear Timer If you select [On] for Auto Error Clear, set the amount of time to wait before automatically
clearing errors.
Value : 5 to 495 seconds (in 5 second increments)
NOTE
This function is displayed when [Auto Error Clear] is set to [On].
Unusable Time* 1 For details, refer to the FAX Operation Guide.
Sleep Rules (models for
Europe) Select whether to use the Sleep mode for the following functions individually:
•
Network
• USB Cable
• Card Reader* 2
• FAX* 1
• Application
Value : Off, On
NOTE
If the sleep condition is not turned off, the machine will not wake from sleep mode even if it receives
a print job from a computer connected by USB cable. Also, the ID card cannot be recognized.
Item Description