TA Triumph-Adler 6555i - Manual (Page 459)

10-23
Troubleshooting > Troubleshooting
E
F
Check the side feeder. — The side feeder is not installed
correctly. Attach the side feeder. —
Confidential document
was detected. ― The machine detects the document
guard pattern. Job is canceled.
Press [End]. ―
* When Auto Error Clear is set to [On], processing resumes automatically after a set amount of time elapses.
Message Checkpoints Corrective Actions
Reference
Page
Empty the punch waste
box. Is the punch waste box full? Follow the instructions on the
screen. and empty the punch waste
box. page 10-14
Error occurred at
cassette #. ― Open the cassette. Check inside
the machine and remove the paper. ―
Error occurred at the
multi purpose tray. — Remove the paper from the multi
purpose tray. —
Message Checkpoints Corrective Actions
Reference
Page
Failed to specify Job
Accounting.
*
* When Auto Error Clear is set to [On], processing resumes automatically after a set amount of time elapses.
— Failed to specify Job Accounting
when processing the job externally.
The job is canceled. Press [End]. —
Failed to store job
retention data. — The job is canceled. Press [End]. —
Folding tray is full of
paper. Is the acceptable storage capacity
exceeded? Remove the paper. Printing then
resumes. —
Message Checkpoints Corrective Actions
Reference
Page