TA Triumph-Adler 6555i - Manual (Page 284)

6-34
Using Various Functions > Functions
* The input units can be changed in System Menu. For details, refer to Measurement on page 8-14 .
Item Value Description
Border Erase
Sheet Border Metric: 0 mm to 50 mm
(in 1 mm increments)
Inch: 0.00 to 2.00"
(in 0.01" increments)
Set the border erase width.*
Set the value by pressing [+] or [-].
Press [# Keys] to use the numeric keys for
entry.
Back Page Same as Front Page, Do Not Erase For 2-sided originals, press [Back Page] and
then press [Same as Front Page] or [Do Not
Erase].
Border Erase
Book Border Metric: 0 mm to 50 mm
(in 1 mm increments)
Inch: 0.00 to 2.00"
(in 0.01" increments)
Set the border erase width.*
Set the value by pressing [+] or [-].
Press [# Keys] to use the numeric keys for
entry.
Gutter
Back Page Same as Front Page, Do Not Erase For 2-sided originals, press [Back Page] and
then press [Same as Front Page] or [Do Not
Erase].
Individual Border
Erase Top Metric: 0 mm to 50 mm
(in 1 mm increments)
Inch: 0.00 to 2.00"
(in 0.01" increments)
Set the border erase width.*
Set the value by pressing [+] or [-].
Press [# Keys] to use the numeric keys for
entry.
Bottom
Left
Right
Back Page Same as Front Page, Do Not Erase For 2-sided originals, press [Back Page] and
then press [Same as Front Page] or [Do Not
Erase].
Original
Orientation Top Edge on Top, Top Edge on Left Select the orientation of the original document
top edge to scan correct direction. Press
[Original Orientation] to choose orientation of
the originals, either [Top Edge on Top] or [Top
Edge on Left]. Then press [OK].