TA Triumph-Adler 6555i - Manual (Page 79)

2-23
Installing and Setting up the Machine > Login/Logout
Login/Logout
If you are setting a function that requires administrator rights, or if user login administration is enabled, you must enter
your login user name and login password.
Login
Normal login
1 Enter the login user name and login password to login.
If this screen is displayed during operations, press [Login User Name] to enter the login user
name.
Alternatively, you can login by pressing [Login Password] and entering the login password.
NOTE
• The factory default login user name and login password are set as shown below.
You will be unable to login if you forget your login user name or login password. In this event, login with administrator
privileges and change your login user name or login password.
• If the guest authentication setting is enabled, the [ Authentication/Logout ] key must be pressed when logging in.
For details, refer to the Guest Authorization Set. on page 9-18 .
Character Entry Method (page 11-9)
NOTE
[# Keys] can be pressed to enter the number with the numeric keys on the operation panel.
If [Network Authentication] is selected as the user authentication method, either [Local] or
[Network] can be selected as the authentication destination.
To authenticate by ID card, press [ID Card Login].
Model Name Login User Name Login Password
6555i 6500 6500
8055i 8000 8000
Login
User Name
Login
Enter login user name and password.
Login
Password
abcdef
********
Login to: Local
# Keys
ID Card
Login
Cancel Check Counter
# Keys
1
2
3