TA Triumph-Adler 6555i User Manual
Page 153
3-49
Preparation before Use > Registering Destinations in the Address Book
The Folder (FTP) Address
Press [Change] of "Host Name", "Path", "Login User Name" and "Login Password", enter the
information for each item and press [OK].
The table below explains the items to be entered.
*
If you specify a port number other than the default (21), use the "Host name: port number"
(Example: FTPhostname:140).
To enter the IPv6 address, enclose the address in brackets [ ].
(Example: [3ae3:9a0:cd05:b1d2:28a:1fc0:a1:10ae]:140)
2
Check if the destination entry is correct and press [Save]. The destination is added to the
Address Book.
To register the registered address in a one-touch key, press [Yes] in the pop-up screen that appears
after [Save] is pressed.
Item
Descriptions
Max. No. of
Characters
Host Name*
Host name or IP address of FTP server
Up to
64 characters
Path
Path for the file to be stored
For example, "User¥ScanData".
If no path is entered, the file is stored in the home
directory.
Up to
128 characters
Login User Name
FTP server login user name
Up to
64 characters
Login Password
FTP server login password
Up to
64 characters
NOTE
• Refer to the
Character Entry Method on page 11-9
for details on entering characters.
• Press [Connection Test] to check the connection to the FTP server you chose. If the
connection fails, check the entries you made.
NOTE
To register a new One Touch Key, refer to
Adding a Destination on One Touch Key (One
.