TA Triumph-Adler 6555i - Manual (Page 78)

2-22
Installing and Setting up the Machine > Installing Software
Setting WIA Driver
Register this machine to the WIA Driver. Instructions are based on interface elements as they appear in Windows 7.
1 Display the screen.
1 Click [ Start ] button on the Windows and enter [ Scanner ] in [ Program and File Search ].
Click [ View scanners and cameras ] in the search list then the Scanners and Cameras
screen appears.
In Windows 8, click [ Search ] in charms, and then [ Settings ], and enter "Scanner" in the search box.
Click [ View scanners and cameras ] in the search list then the Scanners and Cameras screen
appears.
2 Select the same name as this machine from WIA Drivers, and press [ Properties ].
2 Configure WIA Driver.
1
2
Enter the machine IP
addresses or host name.
1
2
When user login administration is enabled
Select the checkbox beside [
Authentication ], and enter Login User
Name (up to 321 characters) and Password (up to 64 characters).
When job accounting is enabled, select the checkbox beside
[
Account ], and enter the account ID as many as eight digits.
5
6
When using SSL, select
the checkbox beside
SSL. 3
4
Set units of measurement.