TA Triumph-Adler 6555i - Manual (Page 372)

8-38
Setup and Registration (System Menu) > System Menu
Admin Report Settings
Configure settings for fax functions. For details, refer to the FAX Operation Guide.
Result Report Settings
*1 Displayed only when the optional FAX Kit is installed.
*2 This is not displayed if you selected [Off] for FAX RX Result Report.
Service Status Prints the service status. More detailed information is available than on the Status Page.
Service personnel usually print the service status pages for maintenance purpose.
Optional Network Status Prints the optional network status, allowing you to check the information including optional
network interface firmware version, network address and protocol.
NOTE
This function is displayed when the optional Network Interface Kit is installed.
Report
Report
Item Description
Send Result Report Automatically print a report of transmission result when a transmission is complete.
E-mail/Folder Print a report of E-mail/Folder transmission results.
Value : Off, On, Error Only
FAX*
1
For details, refer to the FAX Operation Guide.
Canceled before
Sending Print a send result report when the job is canceled before being sent.
Value : Off, On
Recipient Format Select the Recipient Format for the send result report.
Value : Name or Destination, Name and Destination
FAX TX Resolution* 1 For details, refer to the FAX Operation Guide.
Job Finish Notice Setting* 1 For details, refer to the FAX Operation Guide.
RX Result Report Type* 1 * 2 For details, refer to the FAX Operation Guide.
Item Description
NETWORK STATUS PAGE