TA Triumph-Adler 6555i User Manual
Page 464
10-28
Troubleshooting > Troubleshooting
T
Message
Checkpoints
Corrective Actions
Reference
Page
The cover is open.
Is there any cover which is open?
Close the cover indicated on the
screen.
―
The folding unit is open.
—
Close the folding unit.
—
The password does not
meet password policy.
Is the password expired?
Change the login password.
The job is canceled. Press [End].
Is the password policy requirement
(such as password length or
required characters) changed?
Confirm the password policy
requirements and change the login
password.
The job is canceled. Press [End].
The power cable is
unplugged.
―
Turn the main power switch off and
check that the power cable is
correctly plugged.
After checking the power cable, turn
the main power switch on.
—
The print system
connected to the current
port is not supported by
the printer driver.
Use a printer driver for
this port that matches
the print system.
Is the printer driver for this product
used?
Check the product name of the
machine and reinstall the printer
driver.
—
The removable memory
is not formatted.
Is the removable memory formatted
by this machine?
Perform [Format] on this machine.
―
The slit glass requires
cleaning.
—
Clean the slit glass using the
cleaning cloth supplied with the
document processor.
This user account is
locked out.
—
Contact administrator.
The job is canceled. Press [End].
―
Toner container is
empty.
―
Replace the toner container to our
specified toner container.
Toner is empty.
—
Replace the toner container to our
specified toner container.
Toner is low. (Replace
when empty.)
—
It is almost time to replace the toner
container. Obtain a new toner
container.
—
Tray # is full of paper.
Is the acceptable storage capacity
exceeded?
Remove the paper. Printing then
resumes.
—
Is the paper curled?
Check the checkpoints of "Printouts
are curled." in Solving Malfunctions
and take the corrective actions.