Wsd scan/dsm scan, Wsd scan/dsm scan -37 – TA Triumph-Adler 6555i User Manual
Page 213
5-37
Operation on the Machine > Sending
WSD Scan/DSM Scan
WSD Scan
WSD Scan saves images of originals scanned on this machine as files on a WSD-compatible computer.
Installing Driver Software (for Windows 7)
1
Click the [
Start
] button on the Windows, and then click
[
Network
].
In Windows 8, select the Desktop in the Start screen and click [
Libraries
], and then
[
Network
].
2
Install the driver.
Right-click the machine's icon (Brand Name: XXX:XXX) and then click [
Install
].
During the installation, double-click the icon shown on the task bar to display the "
Driver
Software Installation
" screen. When "
Your devices are ready to use
" is displayed on the
[
Driver Software Installation
] screen, the installation is completed.
NOTE
To use WSD Scan, confirm that the computer used for WSD scanning and the machine is network-connected, and
is set to [On] in the network settings.
For information on operating the computer, refer to the computer's help or the operation guide of your software.
NOTE
When [
Network
] does not appear in the Start menu, perform the following procedure.
1
Right-click [
Start
] and click [
Property
] in the menu that appears.
2
Select the [
[Start] menu
] tab in the "
Task bar and [Start] menu properties
" screen, and
click [
Customize
].
3
When the "
Customize [Start] menu
" screen appears, select the "
Network
" check box
and click [
OK
].
NOTE
If the "
User Account Control
" window appears, click [
Continue
].
If the "
Found New Hardware
" window appears, click [
Cancel
].