TA Triumph-Adler DC 2116 - Manual (Page 103)

Other Features of this Fax
5-7
Initiating Fax Reception From a Connected Telephone (Remote Switching)
Remote Switching lets you initiate fax reception from a telephone that is connected to this fax
machine. This function is thus convenient if you want to be able to initiate fax reception from a
location separate from the fax machine itself.
Note Remote Switching is only possible if a separately purchased telephone with tone dialing capabilities
is connected to this fax machine.
Changing the Remote Switching Number
The factory default setting for the Remote Switching Number is “55”, but you can change this if you
want.
Note If you want to cancel the procedure part way through, press the Reset key. The operation panel will
return to the initial mode settings.
1 Open the cover plate to the left and press the Register
key.
2 Press the S key or the T key to select Program Fax
Parameter.
3 Press the Enter key.
4 Press the S key or the T key to select Remote
Switch.
5 Press the Enter key.
6 Use the keypad to enter the new Remote Switching
Number (2 digits).
If you want to reset the displayed number to “00”,
simply press the Stop/Clear key.
7 Press the Enter key. Registration of the new Remote Switching Number is complete.
Press the Reset key. The operation panel will return to the initial mode settings.
Program:
Program encryption box
Program Fax Parameter
Program Encryption ID
Program Fax Parameter:
Fax Forwarding
Remote Switch
Permit ID No.
:55
Remote Switch:55
Enter Remote Switching No.