TA Triumph-Adler DC 2116 - Manual (Page 35)

Fax Operation (Names of Parts / Preparations / Features and Functions of this Fax)
1-21
Receiving Documents Even When Paper Has Run Out (Memory Reception function)
When you cannot print out because paper has run
out or a paper jam occurs, the data for all received
documents will be temporarily stored in memory
and will then be printed out automatically once
printing is enabled.
Important! If, for any reason, power to the fax is disconnected or lost, data received into memory may be lost.
Ask the other party to retransmit any documents for which data was lost. (See page 4-1.)
Backing Up Memory Even During a Power Failure (Image Memory Backup function)
If, for any reason, power to the fax is disconnected
or lost, the back-up battery in this machine will
protect all data related to documents that were
already received into Image Memory, or that are
waiting for transmission, for up to 60 minutes.
Thus, if power is restored to the fax within that time
period, those communications that were scheduled
and waiting in memory prior to the failure will be
carried out as scheduled.
If power cannot be restored in time and data is lost,
a Power Failure Report that indicates what
information was lost will be automatically printed out once power is restored to the fax.
Note The actual length of time the back-up battery will protect the data in memory may differ depending
on the conditions and environment of use of this machine.
Rotating Received Data to Fit the Available Paper (Rotate Received Data function)
Even if the orientation of the received documents
and of the paper set in the drawers differs, if their
size is the same (11" x 8
1/2
" [A4]), this function will
automatically rotate the received data
90°counter-clockwise before printing it out. No
special settings are required to use this function.
Notes • If paper of the same size is set in different orientations, depending on the type of
communication that is involved, there are times when rotation of the received data is not
possible. For further information on paper orientation, see Paper Size and Priority Feed Chart
(Inch version) on page 10-5 and 10-6.
• If the transmitting party’s TTI information is set to be printed outside the border of the
transmitted page, received data cannot be rotated and the received image will be reduced
slightly to enable the appropriate information to be printed out.