TA Triumph-Adler DC 2116 - Manual (Page 191)

8-1
8 Optional Equipment
Duplex Unit
By installing the optional Duplex Unit, Duplex Reception – in which paper is turned over inside the
fax machine and printing accomplished on the back side – will be possible. When the width of each
page received is exactly the same, the documents will be printed onto the front and back sides of
that size of paper.
Notes • To use the Duplex Reception function, it is necessary to turn it ON in advance.
• When the Duplex Reception function is turned ON, all pages of a fax reception will be
temporarily stored in memory – regardless of the reception mode setting – and they will then be
printed out at one time.
Turning Duplex Reception ON/OFF (Duplex RX setting)
With the Duplex Reception function, it is possible to print onto the back side of received faxes. To
use the Duplex Reception function, it is necessary to turn it ON in advance.
Notes • You CANNOT use duplex reception in combination with 2 in 1 reception.
• If you want to cancel the procedure part way through, press the Reset key. The operation panel
will return to the initial mode settings.
1 Press the System Menu key.
2 Press the T key to select Fax Default.
3 Press the Enter key.
4 Press the S key or the T key to select Duplex RX
[2-sided RX].
5 Press the Enter key.
6 Press the S key or the T key to select whether to turn
Duplex Reception On or Off.
The asterisk (*) in the message display indicates the
current setting.
7 Press the Enter key. The setting for Duplex Reception is complete.
If you are finished making settings, press the Reset key. The operation panel will return to the initial
mode settings.
Printer Default
Machine Default
System Menu / Counter
Fax Default
Fax Default:
PaperFeed Sel.
2 in 1 RX
:AutoSelect
:Off
Duplex RX :Off
On
Off
Duplex RX:
*