TA Triumph-Adler DC 2116 - Manual (Page 107)

Other Features of this Fax
5-11
Note If you want to cancel the procedure part way through, press the Reset key. The operation panel will
return to the initial mode settings.
1 Open the cover plate to the left and press the Polling
key.
2 Press the S key or the T key to select RX Polling.
3 Press the Enter key.
4 Enter the fax number of the transmitting party.
You can enter the fax number using the keypad,
abbreviated numbers, one-touch keys, group dial keys,
chain dial keys or the directory.
5 If you want to designate the communication for this fax
number as a Subaddress Bulletin Board Polling
Reception, press the Sub-Address key.
> If you pressed the Sub-Address key, proceed to
step 6.
> If you DID NOT press the Sub-Address key,
proceed to step 9.
6 Enter the subaddress you want to use for this
Subaddress Polling Reception.
The subaddress can be up to 20 digits in length and
can include any combination of the numerals 0 – 9.
7 Press the Enter key.
8 If necessary, enter the predetermined Subaddress
Communication password.
The password can be up to 20 digits in length and can
include any combination of the numerals 0 – 9 and the
symbols “*” and “#”. You do not have to enter a
Subaddress Communication password here if you agree in advance with the transmitting party not
to use one.
If you DO NOT need to enter a Subaddress Communication password, proceed to step 9.
Polling Communication:
TX Polling
RX Polling
:
Enter Destination
Subaddress:
Enter Subaddress
20 Digits
Password:
Enter Your Password
20 Digits