TA Triumph-Adler DC 2116 - Manual (Page 22)

Fax Operation (Names of Parts / Preparations / Features and Functions of this Fax)
1-8
Turning TTI Transmission ON/OFF ("TTI" setting)
The TTI (Transmit Terminal Identifier) refers to information – such as the time of the transmission,
the number of pages, your station name and fax number, etc. – that is automatically sent to the
receiving party's fax and printed out on the received documents. With this fax, you can select here
whether or not that TTI information will be sent to the receiving party's fax, and – if it is – whether it
will be printed inside or outside the border of the transmitted page.
Notes • Prior to operation, check the message display to make sure that the touch panel is in the initial
mode for fax operation. (See What is the “Initial Mode”? on page 1-13.)
• If you want to cancel the procedure part way through, press the Reset key. The operation panel
will return to the initial mode settings.
1 Press the System Menu key.
2 Press the T key to select Fax Default.
3 Press the Enter key.
4 Press the T key to select TTI.
5 Press the Enter key.
6 Press the S key or the T key to select whether or not
you want the TTI information to be sent and, if so, the
location where it will be printed.
If you selected Outside Page, the TTI information
will be printed outside the border of the transmitted
page.
7 Press the Enter key. The setting for TTI Transmission is complete.
8 Press the S key or the T key to select End and press the Enter key. To finish the setting and return
to the initial mode settings, press the Reset key.
Printer Default
Machine Default
System Menu / Counter
Fax Default
Fax Default:
End
Line Type
TTI
:Tone Dial
:Outside P.
TTI:
Outside Page
Inside Page
*
Do not Print