TA Triumph-Adler DC 2116 - Manual (Page 205)

Reference Information
10-5
Paper Size and Priority Feed Chart (Inch version)
If the drawers do not contain paper that is of a size and orientation exactly the same as that of the
received documents, the FAX will automatically select the most appropriate paper for print out. The
following chart indicates the order of priority for paper selection in such a case.
<Notes for this Chart>
• The abbreviations in the chart above refer to the following paper sizes:
S T: 5
1/2
" x 8
1/2
" [width-wise]
STR: 5
1/2
" x 8
1/2
" [length-wise]
L T: 8
1/2
" x 11" [width-wise]
LTR: 8
1/2
" x 11" [length-wise]
L G: 8
1/2
" x 14"
L D: 11" x 17"
• The top edge of the paper in these illustrations indicates the direction of feed for transmission
or print out.
• If the same size of paper is set in more than one location, the upper drawer will have priority for
paper feed.
• If the either of the Fixed Size or Fixed Cassette modes are selected in the Paper Feed
Selection Mode setting, that setting will take precedent over the order indicated here.
• *1: Indicates that the Rotate Received Data function will be used.
• *2: When the image of received documents is automatically reduced to fit onto the paper,
8
1/2
" x 14" size images will be reduced to fit onto 8
1/2
" x 11" [length-wise] size paper.
: Indicates that a received page will be split and printed onto 2 or more separate sheets of paper.