TA Triumph-Adler DC 2116 - Manual (Page 178)

Various Settings and Registration
7-8
Making Volume Settings ("Volume" setting)
The volume of the alarm, the monitor and the speaker can be adjusted here, or you can make the
alarm inaudible.
<Alarm Buzzer Volume>
Sets the volume of the alarm that sounds in the event of a communications error or when you press
an incorrect key on the operation panel.
<Monitor Volume>
Sets the volume of the internal speaker that allows you to listen to conditions on the telephone line
when the On-Hook key was NOT pressed.
<Speaker Volume>
Sets the volume of the internal speaker that allows you to listen to conditions on the telephone line
when the On-Hook key WAS pressed.
Note If you want to cancel the procedure part way through, press the Reset key. The operation panel will
return to the initial mode settings.
1 Press the System Menu key.
2 Press the T key to select Fax Default.
3 Press the Enter key.
4 Press the S key or the T key to select Set Volume.
5 Press the Enter key.
Printer Default
Machine Default
System Menu / Counter
Fax Default
Fax Default:
#Rings(AutoRX)
Dial Confirm
Set Volume
: 2Times
:On