TA Triumph-Adler DC 2116 - Manual (Page 40)

Fax Operation (Basic Use)
2-4
(3) Set the documents face-up on the document table.
DO NOT set more documents than indicated by the
paper volume lines that are located on the inside of
the rear document insert guide. Setting more than
the acceptable number of documents can be the
cause of document jams.
Refer to the Basic Edition of the Operation Guide
for your machine for more detailed information on
the Document Processor.
It is possible to set duplex (2-sided) documents and
have both the front and back sides of those documents transmitted. (See page 3-1.)
<Setting the Documents on the Platen>
Documents can also be transmitted by lifting open the Document Processor and setting one
document at a time directly on the platen. ALWAYS use the platen when transmitting pages from
books and the like.
(1) Set the document face-down and align it properly
with the lines on the original size scales.
(2) When transmitting single-sheet documents directly from the platen, BE SURE to close the
Document Processor.
If you want to transmit documents without closing the Document Processor, be sure to press the
Original Size key and manually select the size of the original
Caution
DO NOT leave the Document Processor open as there is a danger of personal injury.