TA Triumph-Adler DC 2116 - Manual (Page 95)

Troubleshooting
4-5
I was able to receive a fax,
but it was not printed out
and the documents are
not in memory. Is Fax Forwarding turned ON? Check the Fax Forwarding setting. 5-34
I am not able to receive
documents. Is the modular cord connected correctly? Connect the modular cord correctly. 1-1
Is Communication Error. displayed? Perform the necessary procedure to
correct the error and try to receive the
documents again.
10-7
Is Password Check Reception turned
ON? Turn Password Check Reception OFF. 5-53
I am not able to perform
Memory Reception. Is the memory in your fax machine full? Try to receive the documents once again
after memory becomes available or after
you create available space in memory.
3-20
5-20
5-63
I am not able to perform
Polling Reception. Did the transmitting party perform the
Polling Transmission procedure
correctly? Check with the transmitting party. 5-9
I am not able to perform
Subaddress-based Relay
Broadcast Transmission. Does the relay station fax machine have
the same Subaddress-based Relay
capabilities as your fax machine? If the relay station fax machine does not
have the same Subaddress-based Relay
capabilities as your machine, Relay
Broadcast Transmission will NOT be
possible. Check with the relay station. 5-28
Is there an appropriate box (equal to a
Subaddress Relay Box) registered in the
relay station’s fax machine? Check with the relay station. 5-28
Does the subaddress and the
Subaddress Communication password
that you entered match the
corresponding subaddress and
Subaddress Communication password
that is registered in the relay station’s fax
machine? If you think the information you entered
IS correct, check with the other party. 5-30
Is the memory in the relay station’s fax
machine full? Check with the relay station. -
During registration of a
Subaddress Relay Box (or
Subaddress Confidential
Box), an error occurs
when I enter the
subaddress and I cannot
register the Subaddress
Relay Box (or Subaddress
Confidential Box). Is the subaddress you are trying to enter
the same as the subaddress already
registered for another Subaddress Relay
Box (or Subaddress Confidential Box) or
the same as a registered Encryption Box
number? You CANNOT register a subaddress for
a Subaddress Relay Box (or Subaddress
Confidential Box) that is identical to the
subaddress of a previously registered
Subaddress Relay Box (or Subaddress
Confidential Box) or a registered
Encryption Box number. Select a
different subaddress. 5-15
Problem Check point Procedure Page