TA Triumph-Adler DC 2116 - Manual (Page 126)

Other Features of this Fax
5-30
8 Proceed to the appropriate step as indicated below:
> If you pressed the Delayed Tx. key in step 2, proceed to step 9.
> If you DID NOT press the Delayed Tx. key, proceed to step 11.
9 Press the Enter key.
10 Use the keypad to enter the desired time for the transmission to begin.
If you want to reset the displayed time to “00:00”, simply press the Stop/Clear key.
11 Press the Enter key. The transmission operation will begin.
If a time for the transmission to begin was designated, the transmission operation will begin when
the appointed time is reached.
Printing Out a Subaddress Relay Box List
Print out this list in order to check the information currently stored in each Subaddress Relay Box.
Notes • If there are no Subaddress Relay Boxes registered in this fax, a Subaddress Relay Box List will
not be printed out.
• If you want to cancel the procedure part way through, press the Reset key. The operation panel
will return to the initial mode settings.
1 Open the cover plate to the left and press the Print
Report key.
2 Press the S key or the T key to select Subaddress
Box List.
3 Press the Enter key.
4 Press the S key or the T key to select Subadd.
Relay Box List
[Subaddr. Relay Box List].
5 Press the Enter key. A Subaddress Relay Box List will be printed out.
The operation panel will return to the initial mode settings.
If there are no Subaddress Relay Boxes registered in this fax, an error message will be displayed
before the operation panel returns to the initial mode settings.
Print Report:
User Setting List
Encryption Box List
Subaddress Box List
Subaddress Box List:
Subadd. Confi. Box List
Subadd. Relay Box List