TA Triumph-Adler DC 2116 - Manual (Page 146)

Other Features of this Fax
5-50
2 Press the S key or the T key to select Program Fax
Parameter.
3 Press the Enter key.
4 Press the S key or the T key to select Permit Tel
No. [Permit tel nr].
5 Press the Enter key.
6 Use the S key or the T key to select an unregistered
number from among #1 – #5.
7 Press the Enter key.
8 Use the keypad to enter the desired Permit Telephone
Number.
Each Permit Telephone Number can be up to 20 digits
in length and can include any combination of the
numerals 0 – 9.
9 Press the Enter key. Registration of that Permit Telephone Number is complete.
> If you want to continue registering other Permit Telephone Numbers, repeat steps 6 – 9.
> If you are finished registering Permit Telephone Numbers, press the Reset key. The operation
panel will return to the initial mode settings.
Modifying or Deleting Permit Telephone Numbers
Note If you want to cancel the procedure part way through, press the Reset key. The operation panel will
return to the initial mode settings.
1 Perform steps 1 – 5 of Registering New Permit Telephone Numbers on page 5-49.
2 Use the S key or the T key to select the Permit
Telephone Number to be modified or deleted.
3 Perform the following modification or deletion procedure.
> Modifying registered information
(1) Press the Enter key.
Press the Stop/Clear key to clear the currently displayed number from the message display.
(2) Use the keypad to enter the new Permit Telephone
Number to be registered.
Each Permit Telephone Number can be up to 20
digits in length and can include any combination of
the numerals 0 – 9.
(3) Press the Enter key.
Program:
Program encryption box
Program Fax Parameter
Program Encryption ID
Program Fax Parameter:
Own ID
Permit Tel No.
:0000
: Own Name
End
#1:
Permit Tel No.:
#2:
#1:
Program Permit Tel. No.
20 Digits
End
#1:2222222
Permit Tel No.:
#2:
#1:2222222
Program Permit Tel. No.
20 Digits