TA Triumph-Adler DC 2116 - Manual (Page 48)

Fax Operation (Basic Use)
2-12
Canceling a Direct Feed Transmission
All transmissions accomplished in the Direct Feed Transmission mode are handled as operations in
the foreground of the message display. Therefore, the status of these transmissions is always
shown in the message display. Perform the following procedure to cancel this type of transmission.
1 Check the status of the transmission currently in
progress in the message display.
2 Press the Stop/Clear key. The transmission will be
canceled.
If the transmission is still waiting to be initiated, press the T key to select No and then press the
Enter key. The transmission will be canceled.
If the documents are being transmitted from the Document Processor, that document currently
being transmitted will be ejected onto the top cover of the Document Processor.
Canceling a Reception
All fax receptions are handled as operations in the background of the message display. In order to
cancel a background operation, it is first necessary to make that operation appear in the message
display. Perform the following procedure to cancel this type of communication.
1 Open the cover plate to the left and press the
Alternate Display key. The background operation
currently in progress will appear in the message
display.
01Page
:5543
Communicating
Doc #
Document
:005
:
Receive
:5543
01Page