2 fax operation (basic use), Sending documents, Fax operation (basic use) -1 – TA Triumph-Adler DC 2116 User Manual
Page 37: Sending documents -1, 2fax operation (basic use), Switching to the fax operation mode, Selecting the transmission mode
2-1
2
Fax Operation (Basic Use)
Sending Documents
The following contains explanations on the standard method for transmitting documents. Carefully
read all the notes regarding acceptable documents, etc., to ensure correct operation.
1
Switching to the Fax Operation mode
Press the Fax key to switch to the Fax Operation
mode.
When the Fax indicator is lit, the machine is in the Fax
Operation mode.
Check the message display to make sure that the
operation panel is in the initial mode for fax operation.
If the operation panel is not in the initial mode, press
the Reset key.
2
Selecting the transmission mode
Select the desired transmission mode.
There are two transmission modes available in this fax:
Memory Transmission and Direct Feed Transmission.
Memory Transmission is the default setting in this fax
and, in this case, the Memory Tx. indicator is lit.
If the Memory Tx. indicator is NOT lit, the fax is in the
Direct Feed Transmission mode.
MAR-30-2004 15:30
Set Document