TA Triumph-Adler DC 2116 - Manual (Page 90)

Various Functions of this Fax
3-22
Initiating the Fax Connection Manually (Manual Fax Reception)
Once you are connected with the other party, reception can be initiated manually by pressing the
Start key.
Use this mode when you want to talk to the other party prior to actual reception of the documents.
Notes • Manual Fax Reception is only possible if a separately purchased telephone is connected to this
fax machine.
• Auto Fax Reception is the default setting in this fax, so, in order to manually initiate reception, it
is usually necessary to change the reception mode to Manual Fax Reception.
O Preparation
Open the cover plate to the left and press the
TAD/Manual-Rx. key until both the TAD and the
Auto-Rx. indicators go out.
1 When a call comes in, the separately purchased phone
will ring.
2 Pick up the telephone receiver.
3 Check whether or not the call is from a fax.
> If you hear a fax tone...
You are connected to a fax machine.
Press the Start key. Fax reception will begin.
> If the other party’s voice can be heard...
You are connected to a telephone.
Press the Start key at the end of the conversation to initiate reception. Fax reception will begin.
4 Hang up the receiver once the reception begins.