TA Triumph-Adler DC 2116 - Manual (Page 61)

Fax Operation (Basic Use)
2-25
7 If you want to designate this abbreviated number for Subaddress Communication, press the
Sub-Address key and then proceed to step 8.
If you DO NOT want to designate this abbreviated number for Subaddress Communication, proceed
to step 11.
8 Use the keypad to enter the corresponding
subaddress.
A subaddress is required during Subaddress
Communication in order to designate the other party’s
Subaddress Communication Box. The subaddress can
be up to 20 digits in length and can include any combination of the numerals 0 – 9.
9 Press the Enter key.
10 Use the keypad to enter the Subaddress
Communication password. A Subaddress
Communication password is used during Subaddress
Communication. However, you do not have to enter a
Subaddress Communication password here if you
determine in advance with the other party not to use
one.
> If you want to register a Subaddress Communication password, it can be up to 20 digits in length
and can include any combination of the numerals 0 – 9 and the symbols “*” and “#”.
> If you DO NOT want to register a Subaddress Communication password, proceed to step 11.
11 Press the Enter key.
12 Enter the name of the other party.
The name of the other party can be up to 20 characters
in length. (See Entering Characters on page 2-15.)
13 Press the Enter key.
14 Press the S key or the T key to select the desired
transmission speed.
If communication errors occur frequently at 33600bps,
change the setting to 14400bps or 9600bps.
However, in this case, transmission time will be
increased.
> If you pressed the Sub-Address key in step 7, proceed to step 20.
> If you DID NOT press the Sub-Address key in step 7, press the Enter key and proceed to step
15.
15 Press the S key or the T key to select whether or not
you want to designate this abbreviated number for
Encrypted Transmission.
> If you want to designate this abbreviated number for Encrypted Transmission, select On and
proceed to step 16.
> If you DO NOT want to designate this abbreviated number for Encrypted Transmission, select Off
and proceed to step 20.
16 Press the Enter key.
Subaddress:
Enter Subaddress
20 Digits
Password:
Enter Your Password
20 Digits
Enter Destination Name
TX Start Speed:
14400bps
33600bps
9600bps
On
Off
Encryption