TA Triumph-Adler DC 2116 - Manual (Page 141)

Other Features of this Fax
5-45
17 Press the Enter key.
If the fax number you entered has already been registered for this operation or too many numbers
were entered, an error message will appear in the message display. In this case, press the Enter
key and the message display will return to a display that allows you to enter the transmitting party’s
fax number again.
18 Select whether or not you want to continue entering other transmitting fax numbers.
> If you DO want to enter more fax numbers, return to step 12.
> If you are finished entering fax numbers, proceed to step 19.
19 Press the Enter key.
20 Enter a name for the program.
The program name can be up to 20 characters in
length. (See Entering Characters on page 2-15.)
21 Press the Enter key. The entered information will become registered under the designated program
key.
> If you want to continue registering other program keys, return to step 4, page 5-40.
> If you are finished registering program keys, press the Reset key. The operation panel will return
to the initial mode settings.
Enter Program Name