TA Triumph-Adler DC 2116 - Manual (Page 18)

Fax Operation (Names of Parts / Preparations / Features and Functions of this Fax)
1-4
13 Resolution select key & indicators—Press this key when you want to select the degree of
resolution at which the documents will be transmitted. Select among the 5 available resolution
settings: Normal, Fine, Super Fine, Ultra Fine and Half Tone. Ordinarily, all of the resolution
indicators will be out; and the Normal resolution is thus selected. If you want to use any
resolution other than Normal, press the resolution select key until the resolution indicator that
corresponds to the desired resolution is lit.
14 Contrast select keys & indicators—Press these keys when you want to select the degree of
contrast, darker or lighter, at which the documents will be scanned. These indicators display the
3 available levels of scanning contrast. Ordinarily, the middle indicator will be lit. If you want to
increase (darken) the contrast at which documents are scanned, press the right contrast select
key to move the lit indicator towards the right. If you want to reduce (lighten) the contrast at
which documents are scanned, press the left contrast select key to move the lit indicator
towards the left.
15 Memory Tx. indicator—When this indicator is lit, the fax is in the Memory Transmission mode.
When the indicator is out, the fax is in the Direct Feed Transmission mode.
16 On-Hook indicator—This indicator will light when the On-Hook key has been pressed and the
telephone receiver is still “on the hook” (dialing will be possible without picking up the receiver).
17 TAD indicator—When this indicator is lit, the fax is in the TAD Reception mode.
18 Auto Rx. indicator—When this indicator is lit, the fax is in the Auto Fax Reception mode.
19 Document in Memory indicator—When this indicator is lit, there are documents in memory
that are waiting to be printed or communications that are waiting for their appointed start time.
When this indicator is flashing, documents are currently being scanned or received into
memory.
20 Communicating indicator—When this indicator is lit, a fax communication is currently in
progress. When a separately purchased telephone is connected to this fax machine, this
indicator will flash while it’s being used.
21 Communication Error indicator—When this indicator is lit, a communications error has
occurred.
18 17 16 21 20 19
14 13
15