Roland SPD-SX PRO Sampling Pad with 32GB Internal Memory - Manual (Page 113)

Configuring the Overall Settings for the SPD-SX PRO (SYSTEM)
113
Parameter Value Explanation
When “Group” is
“MASTER EFFECT”
Value Explanation
Master Effect Type Switches the master effect type.
When “Group” is
“PAD EDIT KNOB CC”
Value Explanation
OFF, CC1–
95
Outputs MIDI control change messages.
This is optimal for controlling DAWs or external devices
connected via MIDI.
Channel (*1) CH1–16 Sets the channel used to output control change messages.
Controller Explanation
Cursor [ а ] [ б ] [ г ] [ в ] button Selects a parameter.
[-] [+] buttons, [VALUE] knob Edits the setting.
(*1) Enabled when “Group” is “PAD EDIT KNOB CC”.
Groups and corresponding parameters (Param)
Group Param Explanation
MFX1–4
MFX1–4 Switch Switches MFX 1–4 on/off.
MFX1–4 Type Selects MFX 1–4 types.
MFX1–4 Ctrl Adjusts the MFX 1–4 effect intensity.
SIDE CHAIN Side Chain Switch Turns the side chain on/off.
SYSTEM LED
Pad Active Bright Sets how bright the pad’s LED lights up at maximum brightness when you strike the
pad.
Pad Inactive Bright Sets the usual brightness of the pad’s LED (how bright the LED is when the pad is not
struck).
Vertical Bright Sets the LED brightness of the vertical indicators.
MASTER EFFECT Master Effect Type Selects the master effect type.
PAD EDIT KNOB CC
OFF, CC1–95 Outputs the specified MIDI control change message.
* You can also set CH 1–16.
EXP PEDAL
Parameter Value Explanation
Pedal Mode
(SYSTEM)
HH-CTRL,
EXP-CTRL
Switches between functions for the HH CTRL/EXPRESSION jack.
HH CTRL and EXPRESSION cannot be used at the same time.
Exp Pedal Assign
OFF,
CC01:
MODULATION,
CC02: BREATH,
CC03:,
CC04: FOOT TYPE,
CC05: PORTA TIME,
CC06: DATA ENTRY,
CC07: VOLUME,
CC08: BALANCE,
CC09:,
CC10: PANPOT,
CC11: EXPRESSION,
OFF: Use this when you don’t want to assign a function.
CC: Sets the control change number.
MASTER EFFECT CTRL: Lets you control the master effect using the expression
pedal.
(This works the same as the [MASTER EFFECT] knob.)
EXPRESSION: You can use the expression pedal to affect how the sounds play.
The Rx Control Sw settings also need to be made for the expression pedal control
destination.
Set the Rx Control Sw settings individually for each kit.
Configuring the PAD EDIT Knobs and the EXPRESSION Pedal (PAD EDIT KNOB/EXP
PEDAL) (P.75)