Roland SPD-SX PRO Sampling Pad with 32GB Internal Memory - Manual (Page 170)

Effect List
170
*1: This parameter corresponds to MASTER EFFECT CTRL. For details, refer to “ Controlling the MASTER EFFECT with the MASTER
EFFECT Knob (MASTER EFFECT CTRL) (P.199)”.
Step Phaser
This is a stereo phaser. The phaser effect will be varied gradually.
Parameter Value Explanation
Mode
4-STAGE, 8-STAGE, 12-
STAGE
Number of stages in the phaser
Manual 0–127 Center frequency at which the sound is modulated
Tempo Sync (Rate)
OFF, ON If this is ON, the rate synchronizes with the tempo of the rhythm.
Ø KIT TEMPO (P.30)
Rate (Hz) 0.05–10.00 [Hz] Modulation rate
Rate (note)
Note
Ø Note (P.197)
Depth (*1) 0–127 Depth of modulation
Polarity
INVERSE, SYNCHRO Selects whether the left and right phase of the modulation will be the same or the
opposite.
INVERSE: The left and right phase will be opposite.
When using a mono source, this spreads the sound.
SYNCHRO: The left and right phase will be the same.
Select this when inputting a stereo source.
Resonance 0–127 Amount of feedback
Cross Feedback
-98–+98 [%] Adjusts the proportion of the phaser sound that is fed back into the effect.
Negative (-) settings will invert the phase.
Tempo Sync (Step
Rate)
OFF, ON If this is ON, the rate synchronizes with the tempo of the rhythm.
Ø KIT TEMPO (P.30)
Step Rate (Hz) 0.10–20.00 [Hz] Rate of the step-wise change in the phaser effect
Step Rate (note)
Note
Ø Note (P.197)
Mix 0–127 Level of the phase-shifted sound
Low Gain -15–+15 [dB] Gain of the low range
High Gain -15–+15 [dB] Gain of the high range
Level 0–127 Output Level
*1: This parameter corresponds to MFX Ctrl. For details, refer to “ Controlling the MFX with the PAD EDIT [1] [2] Knobs (MFX
Ctrl) (P.198)”.
*1: This parameter corresponds to MASTER EFFECT CTRL. For details, refer to “ Controlling the MASTER EFFECT with the MASTER
EFFECT Knob (MASTER EFFECT CTRL) (P.199)”.