Backing up a kit to a usb flash drive (save 1 kit) – Roland SPD-SX PRO Sampling Pad with 32GB Internal Memory User Manual
Page 135
Backing up and Loading the Data (BACKUP)
135
Backing up a Kit to a USB Flash Drive (SAVE 1 KIT)
Here’s how to back up the kit settings (including the waves that the kits use) to a USB flash drive.
1.
Select [MENU]
Ó
“BACKUP”.
2.
Use the cursor [
а
] [
б
] [
г
] [
в
] buttons to select “SAVE 1 KIT” and press the [ENTER] button.
The USB MEMORY SAVE 1 KIT screen appears.
3.
Use the cursor [
а
] [
б
] buttons to move the cursor to the top row, and use the [-] [+] buttons to select the
kit to back up.
4.
Use the cursor [
а
] [
б
] buttons to move the cursor to the bottom row, and use the [-] [+] buttons to select
a backup destination.
5.
Press the [F6] (SAVE) button.
A confirmation message appears.
If you decide to cancel, select “CANCEL” and press the [ENTER] button.
6.
Use the cursor [
г
] [
в
] buttons to select “OK”, and press the [ENTER] button.
A confirmation message appears, informing you that the task is completed.
Never turn off the power or disconnect the USB flash drive while the screen indicates that the task is still in progress.
7.
Press the [ENTER] button to close the “completed” message.