Roland SPD-SX PRO Sampling Pad with 32GB Internal Memory - Manual (Page 195)

Effect List
195
Looper effects
DJFX Looper
(P.195)
BPM Looper
(P.196)
DJFX Looper
Loops a short portion of the input sound. You can vary the playback direction and playback speed of the input sound to add
turntable-type effects.
Parameter Value Explanation
Length (*1) 0–127 Specifies the length of the loop.
Speed
-1.00–
+1.00
Specifies the playback direction and playback speed.
- direction: Reverse playback
+ direction: Normal playback
0: Stop playback
As the value moves away from 0, the playback speed becomes faster.
Loop Sw
(*1)
OFF, ON If you turn this on while the sound is heard, the sound at that point will be looped. Turn this off to
cancel the loop.
* If the effect is recalled with this ON, this parameter must be turned OFF and then turned ON again
in order to make the loop operate.
Level 0–127 Output Level
*1: This parameter corresponds to MFX Ctrl. For details, refer to “ Controlling the MFX with the PAD EDIT [1] [2] Knobs (MFX
Ctrl) (P.198)”.
*1: This parameter corresponds to MASTER EFFECT CTRL. For details, refer to “ Controlling the MASTER EFFECT with the MASTER
EFFECT Knob (MASTER EFFECT CTRL) (P.199)”.