Roland SPD-SX PRO Sampling Pad with 32GB Internal Memory - Manual (Page 129)

Copying Kits and Pads (COPY)
129
Copying a pad (COPY PAD)
1. Select [MENU] Ó “COPY”.
2. Use the cursor [ а ] [ б ] [ г ] [ в ] buttons to select “COPY PAD” and press the [ENTER] button.
The COPY PAD screen appears.
Button Explanation
[F5]
(EXCHANGE)
Exchanges the pad selected in “From” with the pad selected in “To”.
[F6] (COPY)
Copies (overwrites) the pad in the “From” area to the pad in the “To” area. This erases the pad data saved in the
“To” area.
Parameter Value Explanation
From
USER, USB MEMORY 1–99 Copy source kit location
USER: Copies data from user memory.
You can swap (exchange) the copy source and copy destination kits, but only if the
copy source is in user memory.
USB MEMORY 1–99: Copies pads from backup data saved on a USB flash drive.
Kit number Copy source kit number
PAD1–9, TRIG IN1–8,
FOOT SW1/2
Copy source pad number
To
Kit number Copy/exchange destination kit number
PAD1–9, TRIG IN1–8,
FOOT SW1/2
Copy/exchange destination pad number
3. Press the [F5] (EXCHANGE) button or [F6] (COPY) button.
A confirmation message appears.
If you decide to cancel, select “CANCEL” and press the [ENTER] button.
4. Use the cursor [ г ] [ в ] buttons to select “OK”, and press the [ENTER] button.
After “Completed!” appears, the display returns to the previous screen.