Using this unit separately, Setup examples – Roland SPD-SX PRO Sampling Pad with 32GB Internal Memory User Manual
Page 12
Advertising
Getting Ready to Play
12
*
Rods within a 10.5–30 mm diameter can be mounted on the all-purpose clamp.
Using this unit separately
To use the SPD-SX PRO separately, use the pad stand (PDS-20/PDS-10, sold separately).
Use the screws on the bottom of the SPD-SX PRO to mount it onto the stand holder of the
PDS-20/PDS-10
,
as shown in the
illustration
.
Next, mount the
SPD-SX PRO
onto the pad stand.
See the Owner’s Manual of the pad stand for how to assemble the pad stand or for how to attach the stand holder.
*
Don’t use the screws that are included with the pad stand.
Setup Examples
Advertising