Roland SPD-SX PRO Sampling Pad with 32GB Internal Memory - Manual (Page 46)

Customizing a kit (KIT EDIT 1)
46
Parameter Value Explanation
Transient Sens
ULOW, LOW, MID,
HIGH
Adjusts the transient sensitivity.
Raising the sensitivity makes the transient effect easier to apply when you play a roll.
The transient effect may trigger unintentionally for sounds that have a long release
time, such as cymbals.
In this case, you can lower the sensitivity to reduce the responsiveness.
Transient Gain -INF–+6.0 dB Adjusts the volume after transient adjustment.
Button Explanation
[F1] (MULTI VIEW) Shows the status of pads 1–9 as a list.
[F2] (LAYER) Turns layer A on/off.
[F3] (TRANS) Turns the layer A transient on/off.
[F4] (LAYER) Turns layer B on/off.
[F5] (TRANS) Turns the layer B transient on/off.
[F6] (LAYER COPY) Copies or swaps a layer.
[SHIFT] + [F5] (PAD INIT) Initializes the selected pad.
[SHIFT] + [F6] (PAD COPY) Copies a pad.